Schaeffler Australia

 
 
 
 
 
 
FURTHER INFORMATION

Product catalogue with selection and information system

Thermal tools
PUBLICATIONS
 

Software | 2012-05
FAG Heating Manager (32-Bit) - Select the right heating device easily and quickly

 
 

Software | 2015-07
FAG Heating Manager (US, 64-Bit) - Select the right heating device easily and quickly

 
CONTACT
 
Mounting and Dismounting

Thermal tools

Electric heating plates and heating rings are used to heat rolling bearings and other components with a cylindrical bore where a tight fit on the shaft or in the housing is intended.

Induction heating devices HEATER with mains frequency technology and Induction heating devices with medium frequency technology are used to heat rolling bearings and other components with a cylindrical bore where a tight fit on the shaft or in the housing is intended.

Adequate expansion of the bearings is achieved in most cases at +80 °C to +100 °C. During the heating operation, the maximum heating temperature must be observed. The temperature of rolling bearings must not normally exceed +120 °C, in order to prevent changes to the structure and hardness of the bearing. In all devices for heating, the temperature can be steplessly controlled.

Wear protective gloves during mounting and dismounting of heated parts.